slide1.png
IN-LINE SHUTTLE MACHINES PDF Print E-mail


The SRM Series is a linear machine featuring a central oven with a cooling station on each side. This efficient machine can be purchased with 1 or 2 carts and the second cart can be easily added later. The SRM Series takes up little floor space so this is important for many rotomolders. The carts travel back and forth, in line, between the cooking station (oven) and the cooling station. The latter also acts as the load/unload station.


One of the advantages of our shuttles is the fact that each arm is supported at both ends, not like cantilever arms on most machines. For this reason, our load-bearing capacity is typically 10% to 25% higher than other machines. Another advantage of the shuttle over other types of machines is the independence of each cart. If one cart is busy being serviced or repaired, the other cart is still available for production. Actually a shuttle can operate with one cart if required.


Many years ago we eliminated the doors on our shuttle machines. The end panels on each cart act as doors and they seal the oven so that it remains air tight. No more lost time due to door movements and no more maintenance on doors. This is important for many molders.

Specifications:

  • 2 or 3 stations: 1 oven and 1 or 2 cooling and load/unload stations;
  • Open cooling with floor level fans. Closed cooling is available as an option via covers that can slide over the oven;
  • Carts are designed to handle heavy loads via robust design;
  • An offset arm with arm closure is available as an option;
  • Option: Exact positioning of molds (±1°) via encoders mounted on gear-motors for each axes and programmed in recipe of each part. Thisn positioning can also be used to program the position of each mold for the load/unload process;
  • Variable frequency drives on motors that drive the major and the minor axes;
  • Multi-passage inner air system per arm (2 or 3);
  • Work platforms are recommended on large machines (3000 mm and higher).

 




Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge

Rotomolding independent arm machines with 2, 3 or 4 arms conveyors
Click image to enlarge



© POLIVINIL ROTOMACHINERY S.P.A. Via Crosa 53, 28065 CERANO (NO), ITALY CF/PI 00557310034
© STP ROTOMACHINERY INC. 120 rue des PME, Sherbrooke, J1C 0R2 (Qc) CANADA
SERVING CANADA AND UNITED STATES MARKETS
| Any reproduction is forbidden | General Conditions |